PHOTO: Hardware

O Polished Brass Plated Case Catch
CC2:Suitable for music boxes. Height 5/8" (15.9 mm). Width 1" (25.4 mm).

P Waist Door Lock With Key

Q Bullet Catch
BC3:1/4" (6 mm).

R BCM3 Pillar Caps:
Set of 4 pillar caps with antique finish and black mounting bolts. Suitable for the tops and bottoms of the M3E case kit. Width 1-11/16" (43 mm). Depth 21/32" (16 mm).

A HTA Height Adjusters:Set of four.

B HPL Hanger Plate:Hanger plate with screws.

C Wood Plugs:Black Walnut, Cherry, Mahogany, White Oak.

D WCS Wall Clock Steadier:

E Solid Brass Door Pulls
DP3:, 3/4" diameter.
DP1:, 1/2" diameter.
DP6:, (polished) with wood screws, 3/8" (9.5 mm)
DP5:, Key handle door pull.

F BC2:Uses 5/64" (2.0 mm) drill.

G BC1:Uses 7/64" (2.8 mm) drill.

H Shelf Cleats
Adjustable brass shelving cleats for installing shelving in Cabinets. Drill a series of holes 1" (25 mm) apart and insert cleats, or, in the case of SC3, a sleeve and cleat.
SC2:- Use 5/32" (4.0 mm) drill. Includes 16 cleats sufficient for 4 shelves. SC2 cleats are provided in the W15E Halifax Collector's Case.
SC3:- Use 19/64" (7.5 mm) drill. Includes 12 cleats, 36 cleaves, sufficient for 3 shelves.

I MC1 Magnetic Catch:

J MC2 Magnetic Button Catch:1/2" (12.6 mm) dia. x 9/16" (14.3 mm) deep, 1/8" (0.05 mm).

K NBL Nylon Back Locks:
Set of four.

L BPH Brass plated Hook:With screws.

S BCF6 Pillar Caps:Set of 4 pillar caps with antique finish and black mounting bolts. Suitable for the tops and bottoms of the side columns of the F6E and F6SE case kits see plans on page 46. Width 2-1/8" (54 mm). Height 1-5/8" (40.5 mm). Depth 25/32" (20 mm).


T CL2 Clock Oil:Most clocks need oiling once every two years, buy the oil should be used sparingly (see General Instructions). Made in France, this oil has the correct viscosity and stability for clocks. Oil the main spring (in barrel) and the bearings on the clock plates. DO NOT oil gears.

U CLR2 Oiler:For oiling difficult-to-reach spots on clock bearings. A simple squeeze dispenses exactly the right amount of oil.

VDouble Bullet Catch
Double ball catch can be used instead of a magnetic catch
Size: 2" (50.8mm) x 1/4" (7mm).

Murray Clock Home
© 1998 by Murray Clock Craft Ltd.