The William F. Murray
Grandfather Clock F9SE C- Precut Cherry F9SE A- Precut Ash (See Right) F9SP- Plans
Standing a full seven feet high, the F. William Murray offers a hand-carved leaf design in the pediment and a tasteful decor in the base. The case features glass fitted sides and half pillars running the full height of the case on either side of the door. The design allows for easy construction while maintaining a classical elegance.
Easy to Assemble Case Kit Choose cherry or ash for this fine case kit. Cherry will deliver deep, traditional values under your finish. Ash has the same density as oak, but offers a broader range of hues for your finish, according to the stain you select. As with all our grandfather clocks, both main doors and side doors are pre-assembled for you. Our detailed instructions will guide you step by step as you construct this robustly handsome clock.
Hard to Make Parts Individual sets of the more complicated mouldings and turnings can be purchased separately.
Plans For detailed plans of the William F. Murray order F9SP. Plans are included when you order the pre-cut kit.
Recommended Dials All of the grandfather arch dials depending upon the movement chosen. All of these dials are equipped with mounting plates to mount the dial directly to the clock movement and all have slots at 3 o'clock to accommodate the chime/silencing selection lever. The WA800 arch dial and the SS365 without the mounting plate will also fit in this case.
|
F9SE Ash HCL3T Movement, DJ23TA Dial, HLPD3 Pendulum
Height |
85" (2155 mm) |
Width |
25" (641 mm) |
Depth |
14" (356 mm) |
Weight |
80 lbs. (36.4 kg) |
F9SE A Solid Ash |
F9SE C Solid Cherry |
Bevelled Glass Order BGF9 bevelled glass, optional.
Recommended Movements This case will take any of the Hermle grandfather movements shown and any of the large lyre pendulums.
|