BEVELLED GLASS

PHOTO: Bevelled Glass

Bevelled Glass

All of our grandfather clocks, as well as the Capitol Vienna and Vancouver regulator clocks, can be fitted with bevelled glass, which comes as a kit. The kit contains of all the glass required for a particular clock. For its quality and beauty, we use only 5 mm thick glass with a one-inch bevel. Please consult the chart below for details and order numbers.

Bevelled Glass

For Case

Glass Kit

Doors

Sides

Shelves

Weight

Order #

Lower Panel

Upper Panel*

Side Doors

Side Panels

F9E/F12E BGF9/BGF12

+

+

+

+

36lbs.(17kg)
F10E BGF10

+

+

+

+

+

50lbs (23kg)
F10E
4 piece, full mirrored back
MSF10

36lbs (17kg)
F5E BGF5

+

+

26lbs (7kg)
F7E/F8E BGF7/8

+

+

+

36lbs (17kg)
M1E BGM1

+

+

+

+

32lbs (15kg)
M5E/M5SE BGM5

+

+

+

32lbs (15kg)
W20E BGW20

+

+

26lbs (12kg)
W10E BGW10

+

+

26lbs (12kg)
W22 BGW22

+

+

+

+

15lbs (7kg)
F14E BGF14

+

+

+

+

F15E BGF15

+

+

 
D2E/D3E BGD2

 
W40E BGW40

+

+

* The bevelled glass upper door panel is optional (order BGUD)

Note to custom builders: We do not guarantee that our bevelled glass sets will fit doors other than the pre-assembled doors from our own case kits. If you are building from scratch, we suggest you buy the glass kit ahead of time and build the door and sides according to the glass pieces supplied.

Glass Retainer Mold GLRM
For fastening glass in doors and frames. Made of dark brown plastic, the vertical and horizontal surface is 3/16" (5 mm) wide, with a groove in the half round for embedding small ?nishing nails (included) every 3-4" (75-100 mm). PHOTO: Retainer Diagram

PHOTO: Makers Dial and Plate

MP3

Maker's Dial
Face Plaque

This solid brass plaque, approximately 2" (50 mm) long, has a brushed, silvered finish. It can be mounted on the dial, preferably just below 12 o'clock, or on a dial with a second hand dial, just above 6 o'clock. Individual names are be limited to 16 spaces. The plaque comes with a double-sided adhesive. Simply remove the back paper and press firmly in position on the dial.

MP2

Maker's Plate

You can echo the time-honoured practice of 16th and 17th century clockmakers who labeled their work with a maker's plate. Follow tradition by engraving your name and the year of completion. Or devise your own inscription. We'll even engrave for you at no extra charge, up to a maximum of 18 letters. Mount your plate on any surface you choose, such as the apron of a wall clock, or the bottom of a dial frame. We'll even include round brass brads for mounting your plate to your clock's wood case.



Murray Clock Home
© 1998 by Murray Clock Craft Ltd.